Pay Pal Now Accepted
Jet Models
Prop Planes
Accessories
Landing Gear
Landing Gear Parts & Specifications
Pilots
Help
About Us
Search the Store
Shopping Cart
Login
Home
|
Century Jet Models, Inc.
First, we now offer Pay Pal as a method of payment along with all the major credit cards.
Welcome to our web store. To assist you, we recommend you use the search engine when looking for landing gear. Either select the type of landing gear (i.e., P-51, FW-190) or specific manufacturer's names (i.e., Top Flite, Meister, Bates, Ziroli). You will find this seach engine to be user friendly.
To view our landing gear matrix , click here.
To view our jet aircraft matrix , click here.
To view our prop aircraft matrix , click here.
To view our prop aircraft gallery , click here.
To view our jet aircraft gallery , click here.
Due to the variety of items listed in the store, the shipping cost will vary. Normal shipping cost for
landing gear and accessories within the US is $9.00.
Due to the size of our new WW-II and jet kits, shipping cost vary. See kit description for actual shipping cost within the USA. If you don't see shipping cost listed, please contact us and include your address and ZIP code.
As a reminder, all of our landing gear come with an
air support system (air tank, air line, "T"s, quick disconnects, fill valve, and a standard selector valve.
If you have suggested areas of improvement, please
let us know by contacting us at sales@centuryjet.com.
|
Featured Product
Take a look at these items:
F4U Corsair
Plans by Don Smith Plans. Plug by Mike Floyd. Plane sitting on the mains in approximately 3 hours.
This is a composite 100" scale master F4U kit.
F4U KIT FEATURES includes a:Composite fuselage with panel lines. Removable composite gull section, Composite plug-in outer wing panels with panel lines, Composite flaps, Composite gear doors, Composite ailerons and outer flaps, Composite horizontal stab and elevators with panel lines, Fiberglass, heavy duty cowl with cowl flaps extended, canopy, plus much more.
We also offer an optional retract door sequencing kit, giant main gear retracts with 3/4" diameter oleo struts, scale tailwheel, epoxy painted cockpit and full body painted pilot, scale exhaust stacks, and scale functional cowl flaps that open and close based on the temperature inside the engine cowl.
|
F-22 Raptor Turbine Jet
After extensive research on the F-22 aircraft, analyzing over 100 photos of the F-22, and technical discussions with LM Corporation personnel, we formulated a F-22 model baseline. We then began an intensive level of effort which resulted in a totally new and exciting aircraft. After two years and over 400 man-hours, Century Jet Models is proud to introduce a totally new and exciting aircraft to the R/C Community.The most scale F-22 Raptor on the market today.
|
F-18E Super Hornet
In February 2004, Century Jet Models bought the rights to the ANK F-18E Super Hornet. Basic kit includes a one piece, primed, epoxy fiberglass fuselage with panel lines and intakes installed. All laser cut plywood and carbon fiber parts, composite wings with two aluminum spars installed in each wing, composite vertical stabs, composite horizontal stabs with 3/8 titanium control rods installed, aluminum stab and rudder control arms, composite flight controls (rudders, ailerons, trailing edge flaps), hatches (canopy, engine, stab servo, aileron servo, and flap servo) are include. Fiberglass canopy frame, clear canopy. instruction booklet, and color construction photo brochure are also included. Options include a deluxe kit upgrade, deluxe cockpit and pilot, scale landing gear with tire and brakes, stainless exhaust tubes, and turbine by-pass shrouds.
A proven flyer at Superman 04 and Fla. Jet 05.
F-18E Specifications:
Scale..... 1/6.85
Length...106.5
Wing Span
...........79
Single or Twin Turbine Configuration
Channels.
6 10
|
CJM P-47 102"
In 2003 we decided to complement our current war bird fleet comprised of a F4U Corsair, P-51, Spitfire, and Sea Fury with a P-47 aircraft. The CJM composite kit is based on a combination of the Meister P-47 with permission and published 3-views. In the near future, we will add the a P-40E.
The P-47 fuselage is constructed using epoxy-glass and the composite wings use nomex honeycomb to make the lightest and strongest model possible. A scale master aircraft with multiple optional features.
|
P-47 Kit Items
Here is an overall list of items you can purchase for the CJM P-47 or other similar P-47 kits. If you desire a particular item, mark down the part number and use the webstore search engine to find the part. If all fails, please call us and we will take your order over the phone.
|
2006 Catalog CJM 300
This catalog contains a listing of our landing gear, kits, accessories, with prices. For international orders, add $3.00 for international postage.
|
Arizona Models DO-335 25575
Giant upper main mechanisms with oleo struts. Nose gear comes with these landing gear. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Art Johnson P-38 92" 33814
Centurion upper mechanism with 3/8" diameter oleo struts. Nose gear included. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Balsa Pro Enforcer 34444
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Brian Taylor Typhoon 72" 35822
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Byron F-15 3/4 Turbine 24819
Designed for Bryons' F-18 powered by a turbine engine.
Comes with nose and main gear. Main gear uses 3/4" diameter oleo struts. Axles and air system included.
|
CJM F-22 Retract with Nose Extension 12200
These scale F-22 landing gear are designed for our F-22 kit. They operate in a scale manner. Air system and axles are installed. If you desire the nose gear to extend when selected, select #12200M.
|
CJM Scale A-7 Scale Gear (Navy) 10700N
1/5 scale upper main mechanisms with 3/4" diameter oleo struts which rotate 90 degrees. Scale Air Force or Navy nose gear comes with these landing gear. Axles installed. Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email. These gear operate like the real jet!
|
CMP FW-190 1/2 39195
These gear come with 1/2" diameter oleo struts and a complete small air system. Look at upgrading our standard gear selector valve with our deluxe 4 way and exchange the two valves and save money. Select 1410E.
|
Don Smith Bf-110 89 inch wing span 18210
1/5 scale upper main mechanisms with oleo struts. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Don Smith Bf-110 118" 3/4" 28210
Giant upper main mechanisms with 3/4" diameter oleo struts which rotate 90 degrees. Make specifically for this kit. Axles installed. Comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Don Smith Corsair 100" 3/4" 23310
Giant upper main mechanisms with 3/4" diameter oleo struts which rotate 90 degrees. Scale tail wheel available. See item 33300. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Don Smith Ju-88 1" struts 28810
Giant upper main mechanisms with 1" diameter oleo struts. Tail wheel retract unit available. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Fighter Ace F-86 38666
Centurion upper mechanism with 3/8" diameter oleo struts. Nose Gear included. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Fighter Ace SM-79 37966
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Figure 1, Custom Retract Information
We frequently make scale landing gear. We need to know the measurement from the pivot point to the center of the axle or the measurement from the mounting rail to the center of the axle.
In addition, we need to know (if availabale):
a. Kit manufacturer
b. Aircraft scale
c. Wing Span
d. Aircraft Weight...don't cheat!
e. Measurement from pivot/mounting flange to center of axle.
f. Axle axle if other than 90 degrees.
g. Axle diameter
h. Tire diameter
i. Tire manufacturer (DuBro, Sullivan, etc.)
j. Desire strut diameter (3/8", 1/2", 5/8", 3/4" 1")
|
Figure 3, Three Gear System Hook-Up
There are many ways to hook up three gear. One is shown. Another would be to hook up the nose gear and one main gear which will automatically slow down the respective main gear and nose gear. If your aircraft has a tail wheel vice a nose gear, hook up the system the same except change the nose gear to tail wheel.
|
Figure 4, Dual Cylinder Hook Up
Hook up the dual piston landing gear as shown in Figure 4. Note that there are two separate air systems which provide redundant system operation.
|
Figure 5 Fill Valve Installation
This drawing shows how to mount the fill valve so the maximum threads are available so the air chuck can completely grip onto the valve. Do not use the nut.
|
Figure 7. Brake System Hookup
There are many brake systems to control an aircraft brake system. This is one of the simpliest system to use on the market.
a. You can set it up so that full down elevator will activate the 3 way valve.
b. You can install a "Y" connector so that when full down elevator is selected, a separate servo will actuate the 3 way valve.
c. You can put the brake control system on a separate channel.
d. Contact Mini-Hobbies who has a proportionate control system that is very nice and compact. Cost is around $100.00.
|
Gensis WACO Mains and Tail Wheel 17777
This is pretty fantastic set of landing gear. They are large and a replacement for the ones that come with the Gensis kit.
If you want to see the tail wheel, use the search engine and type in 17777TW.
If you want to see the optional bellcrank, use the search engine and type in 17777BC.
If you want to see the landing gear installed, please contact me at sales@centuryjet.com.
These are pretty fantansic landing gear.
|
Giant Scale F4U Corsair 1/2" 33499
These landng gear are designed to replace those landing gear that come with this kit. Retracts include rotate mechanism, 1/2" diameter oleo struts, axles and a complete air support system (3400).
|
Giant Scale FW-190 39099
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Giant Scale P-51 35199
This is a direct replacement for the current landing gear that come with this kit. The system includes Centurion upper mechanisms, 3/8" diameter oleo struts, axles, and a complete air support system (3400). If you want scale lower P-51 legs, please contain us.
|
Giant Scale P-51 1/2" 35299
Centurion upper mechanism with 1/2" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Giant Scale Planes P-47 34799
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete small air system included! Bullet proof inner struts installed after 11-15-04.
|
Giant Scale Spitfire 71 inch 31899
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Hangar 9 P-40 34088
These gear are specifically designed for the Hangar 9 aircraft. Retract extension angle is 100 degrees. Functional oleo truts come cut to manufacturer specifications. Air system and axles included. Inner struts come with a life time warranty against bending as long as you own the landing gear.
|
Hoestler Skymaster 11399
These retractable landing gear are design for the Hoestler Skymaster. A deluxe 4-Way valve is included to sequence the main landing gear. An air system and nose gear is included.
|
Jet-Mart A-6
Giant upper main mechanisms with 3/4" diameter oleo struts which rotate 90 degrees. Nose gear comes with these landing gear. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email. Ronnie York came to our plant where we designed and installed them in his fuselage.
|
KMP P-38 33820
These landing gear are specifically made for the KMP P-38. Tricycle landing gear with 3/8" diameteer oleo struts, axles, and a standard air system included.
|
Kyosho P-40 34033
Centurion upper mechanism with 3/8" diameter oleo struts which rotate 90 degrees. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Mini Air Gage (Each)
This is a mini air gage used as an accessory in the air systems for the landing gear, canopy, brakes, etc.
|
Models Center Me-262 22683
Giant upper main mechanisms oleo struts. Nose gear comes with these landing gear. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Modeltech P-47 Mechanical 34773M
Centurion Mechanical upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture. Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Modeltech P-47 Pneumatic 34773A
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Palmer A-26 82" 32733A
Centurion upper mechanism with oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date. Nose gear unit included.
|
Palmer A-26 Mechanical 82" 32733M
Centurion mechanical upper mechanism with oleo struts. Axles installed. Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date. Nose gear unit included.
|
Palmer Dash-7 10733
1/5 scale upper main mechanisms with 3/4" diameter oleo struts which rotate 90 degrees. Nose gear comes with these landing gear. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
Made to the specifications of Dan Palmer.
|
Pica Duelist 36604
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Platt T-28 12803
1/5 scale upper main mechanisms with oleo struts. Nose gear comes with these landing gear. Axles installed at angle specified by manufacture and comes with a complete large air system included! Due to end of year close out, photo will be available at a later date. If you need them sooner, please send us an email.
|
Royal P-61 36123
Designed especially for the new Royal P-61. Tricycle landing gear with 3/8" stainless steel functional oleo struts. Air system included. Prototype landing gear being made. Photos to be posted by 10-25-02.
|
SkyShark A-1E 35666
Centurion upper mechanism with 3/8" diameter oleo struts which rotate 90 degrees. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
SkyShark FW-190 39066
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
SkyShark RC Yak-9 30966
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
VQ P-40 34011
Centurion upper mechanism with 3/8" diameter oleo struts which rotate 90 degrees. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
World Models P-51 35128
Centurion upper mechanism with 3/8" diameter oleo struts. Axles installed at angle specified by manufacture and comes with a complete air system included! Bullet proof inner struts installed after 11-15-04. Due to end of year close out, photo will be available at a later date.
|
Metal Four Way Speed Control Selector Valve 1410
Our 4 Way Speed Control Valve slows down the left and right retracts independently to any speed you set. A must for scale retract operation!
The 4 way valve is 1.4" long, 1" wide, and 1/2" tall.
|
Uravitch OV-10 11099
These landing gear are designed for the Uravitch OV-10 kit. The nose gear is almost scale in appearance and uses our Centurion Nose gear unit with 3/8" diameter oleo struts. The main gear uses our 1/5 scale upper mechanisms with 1/2" diamter oleo struts. The main gear trailing link was revised as a result of a customer input at the 2003 WRAM Show to give an almost scale appearance. Want to see the nose gear, click on 11099N. You will have to modify the mounting plates so get the plans adendum before you go too far.
|
Ziroli B-25 3/4 22501
We use our giant upper mechanisms and installed 3/4" diameter oleo struts on the main gear to provide this beautiful plane a touch of class. We use a 5/8" diameter oleo strut using our giant nose gear mechanism. Air system is included. We recommend our deluxe 4 way valve to slow down the retract and extension speed for realistic operation.
|
Nitro Models F-6F 36695
This is the landing gear to fit the Nitro Models F-6F 70" wing span aircraft. A standard air system and stainless steel oleo struts are included
|
Royal F6F Hellcat 36623
Designed especially for the new F6F kit. Upper mechanisms with 3/8" diameter stainless steel oleo struts. Axles and air system included. Prototype gear being made. Photos to be posted by 10-25-02.
|
1 inch Mini Mover CJM 200
This mini-mover has a 2-56 threaded rod and has a 1" throw.
100 PSI maximum pressure. Lifts 5 pounds.
|
CJM F-15E Landing Gear 14800
We took our 1/5 landing gear and added a custom machinced lower leg on the 5/8" diameter nose gear. The main gear are "Beef". We took a machined lower leg and placed it on a functional 3/4" diameter, stainless steel strut to insure those "perfect" landing won't bend the struts. Air system included!
|
Palmer C-123 Provider 12333
These landing gear are made to the specifications of Palmer Plans. A nose gear,2 upper mechanisms, and two stainless steel oleo struts plus air system are included in this package.
|
Palmer C-130 1/12 Scale 132 13033
Working with Dan Palmer, we produced a set of landng gear specifically for this kit. The retract system includes a C-130 nose gear, 2 main retract mechanism, 4 individual, stainless steel,functional oleo struts with axles and air system are included with this package.
See 13033N for the C-130 photo.
|
CJM F4U Scale Tailwheel 33300
There are tailwheels and then, there are tail wheels. This is the scale tailwheel which matches the 3-view of our 100" F4U Corsair. A 2 1/2" tail wheel is reqired. The retract unit mounts vertically to the bulkhead using 8-32 bolts using a unique aluminum triangular mounting bracket. Tail hook included
|
Hargar 9 P-51 150 1/2" 77" 35388
These landing gear are specifically designed for the new 77" wing span Hangar 9 P-51 150. They come with 2 upper mechanism, two 1/2" diameter stainless steel oleo struts, axles, and air system.
|
Palmer C-130 1/18 scale 87" 33033
These landing gear are designed and engineered to meet the specifications of Palmer Plans C-130, 87" wing span. Nose gear, main gear, and air system included. We recommend you consider our deluxe 4 way valve (part #1410E).
|
RAMTEC Fan Unit for K&B .82
The K&B 82 engine is currently out of production. If you desire this fan unit, we will place your order but we must have pre-payment. All orders are final as this is an out of stock engine.
|
RAMTEC Fan Unit for K&B 1.00
The K&B 100 engine is currently out of production. If you desire this fan unit, we will place your order but we must have pre-payment. All orders are final as this is an out of stock engine.
|
CJM Talon Retracts 18000
These are our 1/5 scale landing gear. We include 5/8" diameter oleo struts for light jets and 5/8" diameter struts for heavier, high thrust aircraft. Please specify when ordering.
|
Palmer OV-10 Sport Scale 41033S
These landing gear meet the specifications shown on Palmer Plans. These landing gear look like the scale landing gear with the exception that some of the cosmetic parts are not as detail and the main gear trunion block and yoke at the top of the strut do not exist. See Palmer Plans OV-10 scale retracts to see what the overall gear will look like minus the above items. A giant upper nose gear and 1/5 scale upper mechanism and air system are still included.
|
Palmer OV-10 Scale Retracts 41033
These landing gear meet and exceed the specifications of Palmer Plans OV-10. Using the Palmer Plans as the baseline, we made these scale landing gear using his plans and photos supplied my many modelers. The nose gear uses a giant landing gear upper mechanism. The main gear also come with a aluminum trunion block attached to the 1/5 scale landing gear body. These gear are manpower extensive to make will almost all parts machined from aluminum. Air system included.
|
3 Way Control Valve 60021
Used for the sequencing of inner gear doors that stay open when the gear is down. Many uses such as with brake systems. Small,light weight, and easy to install.
|
Flying Video CJM301
This video shows our ducted fan, turbine, and prop aircraft at flying meets and during kit development.
|
Air Support System with a Small 11 cubic inch Air Tank 3400
This package comes with a small 11 ounce air tank, standard selector valve, fill valve, 5 "T"s, 2 pair of quick disconnects and 5 feet of red and 5 feet of black air line. See Deluxe 4 Way valve (1410) for a selector valve that provides realistic retract slow operation.
|
6 Nylon T Air Line Connectors 1403
"T"s and quick disconnect should be used where necessary. Temporarily enlarge the air line opening to facilitate installation of the nylon "T". Leave excessive air line in the wing and fuselage to insure you have adequate air line for future adjustments.
|
Fill Valve 1406
This is our standard fill schrader valve. It is like the value on your car or bike. Do not use the nut that comes with the valve. It restricts the amount of valve stem. Screw the valve threads on the back side of the valve into the wood mount. Using the search engine, type in "Figure 1" to see more information. No special air pump required.
|
Deluxe Air Chuck 1408
Install this deluxe air chuck on the end of your fill line for use with our standard fill valve. Designed for 1/16" ID air line.
|
1/2 inch Mini Mover CJM 205
This mini mover comes in multiple configuration. Ideal for opening and closing canopy system or other applications where you need a 1/2" stroke.
|
2 inch jet tire
Designed for jet planes where hard rubber tires are required. No lubrication required.
|
Figure 10. Cam and Insert Drawing
If you want to insure the strongest landing gear for those now so perfect landing, following the installation instructions for your particular landing gear, file a flat spot, and insert a dab of slow setting J.B. Weld around the insert and install the strut inside the cam.
|
Figure 11, Pneumatic Retracts/Mechanical Tail Wheel
With the introduction of the new ARF aircraft, many customers want to install our pneumatic retracts with our new super strong, light weight tail wheel units. The easiest way to do this is to install a "Y" connector into the retract channel of the receiver and have one servo operate the landing gear and the other servo operate the up/down motion of the tail wheel unit. Small, inexpensive servos will do the trick. Simple and easy to install.
|
Figure 6, Gear Door System
If you have a plane whose gear doors stay open with the landing gear down, try this hook-up. Simple and it works. We have all the parts and pieces for one stop shopping.
|
RAMLATCH
This is a hatch latch sold by Trim Aircraft.
|
36688 Hangar 9 F-6F Hellcat
We combined our Centurion rotate mechanism with 3/8" stainless steel oleo struts to fit this aircraft. Small air system is included.
|
4
Look for a light weight miniture air cylinder that has a 4" throw for canopy or other applications? Well you found it.
|
ACMT F-4 16480
Specially designed and engineered for the ACMT F-4. Uses our special bodies.
|
ACMT Me-109 11085
Uses the special body mechanism and comes with 5/8" diameter struts. Specially made and engineered to meet the specifications of ACMT.
|
ACMT XP-67 BAT 16781
Designed to meet the specifications of ACMT. This unique twin engine aircraft requires our special 105 degree bodies on all three gear. The nose gear fork is machined and comes with a dual collar for nose gear door attachment. Both the nose gear and main gear struts are 5/8" diameter. The main gear has dual sissors on each main gear. Air system included.
|
Aero-FZD Tucano 14650
These are specially desined landing gear to meet the specifications of Aero-FZD. Upper mechanisms, functional stainless steel oleo struts, axles, and air system included.
A special nose gear give the plane that realistic appearance.
|
Aviation Model P-51 (5/8) 15122
These are gear specially made for Aviation Design's P-51. They use our 1/5 upper mechanisms and come with 5/8" diameter stainless steel oleo struts with a complete air support system. Look at our Deluxe 4 Way Valve to add realism to your retract and extension speed (1410E).
|
Aviation Modeles Dewoitine D.520 5/8 17022
These landing gear are designed for:
Pierre MONMARTY
Avions Modèles Réduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits Corsair 5/8 13322
These landing gear are designed for:
Pierre MONMARTY
Avions Modèles Réduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits FW-190 5/8 19022
These landing gear are designed for:
Aviation Modeles Reduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits Me-109 5/8 10922
These landing gear are designed for:
Pierre MONMARTY
Avions Modèles Réduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits P-40 5/8 14022
These landing gear are designed for:
Pierre MONMARTY
Avions Modèles Réduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits P-47 5/8 14722
These landing gear are designed for:
Aviation Modeles Reduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits P-51 5/8" 15122
These landing gear are designed for:
Aviation Modeles Reduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
Aviation Modeles Reduits Spitfire 5/8 11922
These landing gear are designed for:
Aviation Modeles Reduits
37, Avenue de Clignancourt
Villepinte, France 93420
Phone: 011-33-068 195 6690
These landing gear use our 1/5 upper mechanism and come with 5/8 stainless steel oleo struts. Air system included. They meet the design specifications of the manufacturer.
|
B-17 Tailwheel 31720
This tailwheel was designed for the Wescraft B-17 and can be adapted to most other B-17 aircraft. When ordering, please provide specifications.
|
Bates 1/5 F4F Scale Wildcat Gear 14512
Century Jet Models is proud to produce scale operating landing gear for the Jerry Bates 1/5 Scale Wildcat. Stainless steel struts, aluminum parts, combined with commercial air cylinders make the operation very scale. When the gear is down, the main strut over-centers down and locked. Full size drawings and installation instructions come with the landing gear. A complete air support system along with a deluxe 4 way valve make the up and down operation scale.
We also offer a tail wheel unit for the Wildcat along with a 1/5 scale Navy pilot.
When comparing prices, be sure to compare quality and apples-to-apples. We include an air system with our landing gear!
See our webstore at www.centuryjet.com/webstore for further pictures.
14512 Bates Wildcat plane with a 91 wing span
34512 Bates Wildcat retractable tail wheel unit
W2AF5P 1/5 Scale American Full Body Pilot--Painted
|
Bate's Bearcat Straight Leg and Articulating Comparison
Many of you have asked the difference between a straight leg non-scale and an articulating bearcat leg looks like. This is a photo comparison between the two. Look at 46814 (Cactus Bearcat), 46801 (Ziroli Bearcat) and 46812 (Bates' Bearcat) for differences. This item is form photo comparison and is not for sale so don't order this item.
|
Bates Dewoitine D.520 3/4
These landing gear meet the design specifications in the AutoCad drawings supplied by Jerry Bates. The upper mechanisms are giant scale, the strut diameter is 3/4" diameter. Air system is included.
|
Bates F8F Bearcat Non-Scale 16812
These landing gear use our 1/5 scale body with 1/2" diameter straight struts. Articulating struts are available. See 46812 and 46812A for pictures of the articulating bearcat and straight leg (non articulating) landing gear.
|
|
